FOREST
TREE DOZER |
| The tree dozers MJ, MJS and MJH are machines designed to crush (or pulverize) roots and plants (branches, trees, vegetative (green plant) wastes, etc.) in depths from 0 to 35 cm according to the models. |
| The rotor rotates in the same direction as the forward motion of the dozer and in the opposite direction when the dozer is moving in reverse. |
| When moving in reverse, the matter mounts into the body and is crushed by a counter-knife cutting system. |
| When moving forward, the matter is plowed into the ground and then leveled over by the roller. |
| All the models are equipped with easily interchangeable carbide steel points. |
| Thanks to a rotating speed of 480 rpm, these machines may work the soil. |
| Tree dozer : multi-terrain | ||
|
|
|
| The advantages : |
| • Carbide steel points |
| • Low required horsepower vs crushing capacity |
| • Crushing depth down to 35 cm under ground according to the model |
| • The crushed wood is ground up and mixed with the soil |
| • The modular design of this equipment offers the possibility of selecting just the right model according to needs |
| • High quality steel |
| • Lightweight and solid construction |
|
Tree dozer Type MJ |
| The MJ type is a machine with a width of 1 m to 2.3 m capable of being equipped with a single or dual transmission with double chain drive according to the tractor’s horsepower rating. |
| The 1 m and 1.4 m wide machines are ideal for micro-tractors. |
|
 |
Type
MJ |
Rotor
MJ |
| Data Sheet | MJ-1.0 |
MJ-1.4 |
MJ-1.8 |
MJ-2.3 |
| Work width (mm) | 1000 |
1400 |
1800 |
2300 |
| Max. work depth (mm) | 200 |
200 |
200 |
200 |
| Total width (mm) | 1400 |
1800 |
2200 |
2700 |
| Required horsepower (hp) | 30-180 |
40-180 |
65-180 |
80-180 |
| Number of points | 36 |
51 |
64 |
85 |
| Weight (kg) | 850 |
975 |
1265 |
1510 |
| Ø ext. for rotor (mm) | 405 |
405 |
405 |
405 |
|
Tree dozer Type MJS |
| The MJS type is a machine with a width of 1 m to 2.5 m which is always equipped with a dual transmission with triplex chain. |
| In fact, this machine is ideal for medium sized, high power tractors (Max. 240 hp) |
|
 |
Type
MJS |
Rotor
MJS |
| Data Sheet | MJS-1.0 |
MJS-2.0
DT |
MJS-2.5
DT |
| Work width (mm) | 1000 |
2000 |
2500 |
| Max. work depth (mm) | 250 |
250 |
250 |
| Total width (mm) | 1420 |
2420 |
2920 |
| Required horsepower (hp) | 60-180 |
110-180 |
120-240 |
| Number of points | 36 |
74 |
93 |
| Weight (kg) | 1145 |
1610 |
1825 |
| Ø ext. of rotor (mm) | 515 |
515 |
515 |
|
Tree dozer Type MJH |
| The MJH type is a machine with a width of 1.2 m to 2.8 m |
| This machine was designed for high power tractors and for work at a depth of 35 cm |
| It is equipped with a dual transmission with a cascade pinion gearing and overload limiter (POC 3901) |
|
 |
Type
MJH |
Rotor
MJH |
| Data Sheet | MJH-1.2
DTG |
MJH-2.0
DTG |
MJH-2.5
DTG |
MJH-2.8
DTG |
| Work width (mm) | 1200 |
2000 |
2500 |
2800 |
| Max. work depth (mm) | 50-350 |
50-350 |
50-350 |
50-350 |
| Total width (mm) | 1550 |
2350 |
2850 |
3150 |
| Required horsepower (hp) | 130-300 |
150-300 |
170-300 |
190-300 |
| Number of points | 42 |
84 |
104 |
116 |
| Weight (kg) | 1800 |
2200 |
2500 |
2700 |
| Ø of rotor (mm) | 600 |
600 |
600 |
600 |
| Work speed (km/h) | 0,5-1,5 |
0,5-1,5 |
0,5-1,5 |
0,5-1,5 |